Starting the software & logging In

When you turn on your till, the Impact Fusion Point of Sale software will start automatically. This is indicated by the animated CRB Cunninghams graphic that is displayed while the software loads.

After the software has loaded, you will be presented with the Login screen as below. Before you can use the PoS Software, you must first log into the system.

*The login method(s) that are available for you to use will depend on your system set up. In total, there are four options. The options that are available to you are displayed using the grey tiles at the bottom of the log in screen. The option that is currently selected will be highlighted in green.

Username & Password

The first option available is by entering your username and password. If you are using a touchscreen till that does not have a keyboard connected to it, an on-screen keyboard will open up to allow you to enter your details. Press the green Login button to confirm.

Biometrics (Fingerprint)

If your system is connected to iDStore, you can use your fingerprint to log onto the Point of Sale. Simply press the Biometric tile from the list and place your finger onto the scanner. If a match is found and your account has access you will be logged in.

Card

You can also use your card to log into the Impact Fusion Point of Sale software. Select the card icon from the list and place your card onto the connected card reader. If your account has access you will be logged in.

PIN

The default and the most common method is to use a PIN. Enter your PIN using the on-screen PIN pad and press the green Login button to confirm.